• Best Practices New Normal
  • Digital Dentistry
  • Data Security
  • Implants
  • Catapult Education
  • COVID-19
  • Digital Imaging
  • Laser Dentistry
  • Restorative Dentistry
  • Cosmetic Dentistry
  • Periodontics
  • Oral Care
  • Evaluating Dental Materials
  • Cement and Adhesives
  • Equipment & Supplies
  • Ergonomics
  • Products
  • Dentures
  • Infection Control
  • Orthodontics
  • Technology
  • Techniques
  • Materials
  • Emerging Research
  • Pediatric Dentistry
  • Endodontics
  • Oral-Systemic Health

How to deliver oral appliance therapy as an effective treatment for obstructive sleep apnea

Publication
Article
Dental Products ReportDental Products Report October 2020
Volume 54
Issue 10

The following case study illustrates how scans from the Medit i500 helped alleviate one patient’s OSA.

Waking Up Tired

Michael S. Pagano, DDS

Symptoms of obstructive sleep apnea (OSA) typically begin insidiously and are often present for years before the patient seeks medical treatment. Nocturnal symptoms can include loud, habitual snoring that is bothersome to others. People who sleep in proximity with a patient with OSA may witness interrupted breathing during snoring episodes, often ending with a snort or gasp for air. These gasping and choking sensations may arouse the patient from sleep, though the incidence of waking up is generally very low in proportion to the number of apnea events they experience.

i500 Intraoral Scanner

  • Open system allows for integrated CAD/CAM workflow for the export of STL files
  • Intelligent scan-detecting algorithm with 2 high-speed cameras
  • High resolution makes it easy to locate margin lines and undercuts
  • 3D-in-motion video technology allows for rapid video-based scans
  • Small tip that makes maneuverability easy and improves patient comfort

Medit
medit.com

Daytime symptoms often present as patients complain of waking up just as tired as when they went to bed, which is known as nonrestorative sleep. Patients may also report symptoms of morning headache, dry/sore throat, gastroesophageal reflux, excessive daytime sleepiness, fatigue/tiredness, impaired memory, hypertension, and morning confusion.

The goal of OSA treatment is to reduce the patient’s apnea-hypopnea index (AHI). AHI is an index used to indicate the severity of sleep apnea and measure the number of apnea or hypopnea events per hour. Other positive outcomes of treatment include increasing the patient’s blood oxygen levels and improving cardiorespiratory indicators.

Patient Presentation

In July 2019, a 65-year-old man presented to our clinic with a chief complaint of chronic snoring. His body mass index was 32.8 and neck circumference measured 17.8 inches. He takes omeprazole as needed for gastroesophageal reflux disease and was recently diagnosed with type 2 diabetes, for which his primary care physician prescribed metformin. The patient reported that he has snored for as long as he can remember and has felt tired “for decades.” The patient did not wear any oral device or nightguard during sleep.

Diagnostic Overview

The patient completed an oximetry study with the primary care physician in October 2018 that showed an oxygen desaturation index of 13.5 and an SpO2 nadir, or lowest oxygen saturation level, of 78%. An in-lab sleep study polysomnography test was completed on November 29, 2018. The sleep study results revealed an AHI of 52 with continuous positive airway pressure (CPAP) titration started after 2 hours of sleep. During CPAP, the patient had onset of central OSA with an AHI of 19.5. With the use of a bilevel positive airway pressure (BiPAP) device, the patient was able to control an AHI of 1.8. However, the patient did not want to be tethered to a BiPAP device all night, stating, “I’d rather just leave the sleep apnea untreated than try to use that.”

Treatment Plan

A MATRx™ plus theranostic study from Zephyr Sleep Technologies was performed and showed the patient would be a good responder at 5.5 mm of advancement. A Medit i500 intraoral scanner was used to capture scans of the patient’s mouth and upper and lower arches in 2 bite positions: a maximum intercuspation and an open bite position (Figures 1-4). The scans captured by the Medit i500 were used to design and 3D print a custom SomnoDent Avant™ oral appliance specifically designed to treat this degree of obstructive sleep apnea.

The Medit i500 allowed easy and accurate capture of the full arch scans in multiple bite positions. Accuracy of these scans is an absolute must. The Medit i500 is an open-source device, allowing easy export of the scan data into the sleep aligner design platform for custom morning aligners and 3D printing of the oral sleep appliance directly in the office. For offices without a 3D printer, the scan data may be sent to a lab for appliance fabrication via the accompanying case and workflow management platform Medit Link. The accuracy of the Medit i500 scans and detailed digital designs and manufacturing by SomnoMed allows the delivery of the appliance with zero adjustments.

Clinical Outcome and Discussion

The patient experienced excellent results with the use of SomnoMed oral sleep appliance, having completed an at-home sleep apnea test in January 2020 with an overall AHI of 7. The objective of this case was to remove the patient from the severe obstructive sleep apnea category (AHI of above 30), which has an extremely high correlation with heart attack and stroke. A successful case for this severity is considered a 50% reduction in AHI and a final AHI below 20. In this case, the patient started with an AHI of 52, and after treatment with the oral appliance, his final AHI was reduced to 7, which is considered an extremely successful result. The patient reports restful sleep for the first time in decades, is dreaming more than ever, and has lost 10 pounds since beginning therapy

Related Videos
Catapult Vote of Confidence Video Product Review – BioHorizon’s MinerOss® Plug
Technique in 2 Minutes: How To Create Conservative Smile Rejuvenation On a Patient With Peg Laterals
Technique in 2 Minutes: How to deliver optimal care with the right restorative essentials
How to Increase Efficiency, Predictability, And Durability In Class I Restorations
Technique in 2 Minutes: How To Use The Universal Bond System For A Perfect, Predictable Fit
© 2024 MJH Life Sciences

All rights reserved.