• Best Practices New Normal
  • Digital Dentistry
  • Data Security
  • Implants
  • Catapult Education
  • COVID-19
  • Digital Imaging
  • Laser Dentistry
  • Restorative Dentistry
  • Cosmetic Dentistry
  • Periodontics
  • Oral Care
  • Evaluating Dental Materials
  • Cement and Adhesives
  • Equipment & Supplies
  • Ergonomics
  • Products
  • Dentures
  • Infection Control
  • Orthodontics
  • Technology
  • Techniques
  • Materials
  • Emerging Research
  • Pediatric Dentistry
  • Endodontics
  • Oral-Systemic Health

How to transition your lab from traditional to all-digital

Digital EstheticsDental Lab Products-2014-09-01
Issue 9

In my previous article, I shed light on how moving from manual to digital methods can help lab owners take a major step towards securing the future of their business. However, the transition from manual to digital can be difficult.

In my previous article, I shed light on how moving from manual to digital methods can help lab owners take a major step towards securing the future of their business. However, the transition from manual to digital can be difficult.

To ensure a successful transition, labs need to know what to look for in a new system and they must consider both short- and long-term perspectives.

Workflow integration

Greatly increased productivity is one of the most important advantages that contributes to business success with the introduction of CAD/CAM. Your system’s overall performance will depend on how well the individual workflow steps are connected. Your system should include efficient workflow management that enables easy control and seamless execution of all steps-starting with order management, through scanning, design, and ending with sending of orders for manufacturing. A well-integrated system with strong workflow management features will enable you to access and exploit information from any stage within the case-making the lab’s job much faster and easier.

FREE ebook: Understanding the digital workflow, from start to finish

Available indications and design tools

An important long-term consideration is the range of dental indications and design tools available. Since its dawn, CAD/CAM technology has moved far beyond the earlier stages of “digital coping systems,” and today there are solutions that can digitally handle a wide range of dental indications and service functions. Such systems will not only cover and improve a lab’s current business models, but their additional indications and services can open new business opportunities. The range of advanced tools available is also important. Many labs find they soon “grow out” of their CAD system because it only supports basic tools. Obtaining an indication-rich system with a wide range of advanced tools, or alternatively, starting with a basic system that includes easily obtainable expansion and upgrading options, will increase a lab’s potential for growth and its ability to compete-not only for today, but also in the future.

Related: 5 things every lab needs to know about outsourcing for digital work

Input and output options

A lab’s CAD/CAM system will seldom function as an isolated entity. It gets its original input from intraoral scanners in clinics, desktop scanners or other external systems, and afterward its output is fed into all types of manufacturing machines. A lab should consider their future system’s openness to different input and output sources and its ability to cover all steps in dental workflows digitally.

The future in dental clinics is also digital, and therefore interacting with major digital impression systems in clinics is increasingly important for labs. Interfacing flexibility will allow the lab to work with a wider range of dentists, and to select the best manufacturing machines and materials for the specific case, models and restoration. Some CAD/CAM systems include dedicated and optimized interfaces for commonly used third-party equipment.

Next page: Explore the full potential your CAD system ...

Exploit the Full Potential of Your CAD System: Push for digital changes

Still too many labs purchase a CAD system and use it sporadically or for very specific indications. Labs should go “all-in” with their digital investment-bring as many indications and services as possible into new digital workflows. This is the only way the lab can ensure they will remain competitive and be prepared for a future industry in which full-digital labs have the upper hand. Going from all-manual to all-digital may often require a mental shift-however, going only halfway will simply fail to add enough value in relation to any CAD/CAM investment.

Must read: 5 ways to go digital the RIGHT way

Support and training: exploit your system’s full potential

Adapting digital methods can be a challenge without expert help. The more a lab’s technicians know about their new CAD system, the more value that system will return. This becomes increasingly important as digital dentistry encompasses more and more indications. Therefore, labs should ensure their system is solidly backed by extensive learning channels, such as training packages, user guides, local language support, online webinars and so on. Without these, a lab can risk investing in a full-featured system that runs at half its potential because too many profit-bringing workflow options remain hidden and unexploited. Continuous uptime is also important. Any CAD/CAM investment should include a reliable and straightforward support arrangement with accessible services during local business hours-and preferably in your local language.

Select a Partner for the Future

The dental industry and CAD/CAM technologies are evolving at a rapid pace and not all existing technology providers are expected to survive in such a highly competitive and innovation-demanding market. In recent years, the industry has witnessed a decreasing amount of CAD technology providers and some industry leaders predict that soon only three to five key players will exist in the CAD market. However, what does this mean for labs that are choosing their new CAD system? The last thing a lab needs is to be left with a CAD software system that is no longer backed by support or upgrades. Labs need a provider that will still be around in the future to improve and support its products. Labs should invest in a system from a provider that is strong on innovation and continuously stays at the forefront of the industry. The lab should also take a close look at version upgrade agreements and feature expansion possibilities.

Learn all about 3Shape's latest benchtop scanner

Your checklist: 6 things to remember when going digital

  • Select a CAD system with a high degree of workflow integration and workflow management.

  • Look for a system with a wide range of indications and design tools.

  • Remember the importance of the system’s openness to input and output options such as digital impression systems, manufacturing machines and materials.

  • Push for digital changes in your lab.

  • Ensure you get continuous support, training, learning materials and documentation.

  • Invest in a system from a solid and future-secure provider. 

Editor’s note: This article is the second in a four-part series. Make sure you check out upcoming issues of Dental Lab Products to find out what the future of digital dentistry holds and much more. Don’t miss it!

Tais Clausen is the CTO and co-founder of 3Shape. Since the founding of 3Shape, Clausen has been a key visionary driver in the company’s technology development. His close, almost daily involvement with dental labs and clinics using 3Shape worldwide is the integral factor underlying his recognized expertise when it comes to the current and future needs of modern dental businesses.

Top Photo: Mina De La O / Getty Images

Related Videos
CDS 2024: Ivoclar's e.max ZirCAD Prime Blocks with Shashi Singhal, BDS, MS
The Connected Future of Dental CAD/CAM with Max Milz
Greater New York Dental Meeting 2023 – Interview with Robert Kreyer, CDT
Roland DGA DWX-42W open-architecture chairside mill in action
5Ws* Video - DGSHAPE Cloud
Video Interview: Building the Next Phase of Dental 3D Printing
Product Test Drive: iTero Element 5D Plus with John Flucke, DDS
Training Tomorrow's Dentists with Cutting Edge Technology
Related Content
© 2024 MJH Life Sciences

All rights reserved.