Digital disc jockey

March 21, 2012

Applying New Technologies: ZENOTEC T1 Compatible with Dental Wings and all open model/die, impression or intraoral scanner technologies with STL output, the ZENOTEC T1 benchtop milling unit provides simultaneous 5-axis milling of crown and bridge substructures, implant abutments, and wax/resin patterns as well as quarter- and full-arch models. Its integrated storage magazine stacks up to 28 ZENOTEC discs from which 35 to 40 restorations can be milled from each based on the indication, plus one optional tool disc.

Applying New Technologies: ZENOTEC T1

Compatible with Dental Wings and all open model/die, impression or intraoral scanner technologies with STL output, the ZENOTEC T1 benchtop milling unit provides simultaneous 5-axis milling of crown and bridge substructures, implant abutments, and wax/resin patterns as well as quarter- and full-arch models. Its integrated storage magazine stacks up to 28 ZENOTEC discs from which 35 to 40 restorations can be milled from each based on the indication, plus one optional tool disc. The ZENOTEC CAM 4.0 plus software records at which point restorations have been prepared from the blanks and makes reusing the disc efficient. In this way, up to 1,000 units can be fabricated at a stretch. The unit also features retrieval of tools and automatically checks tools for wear.

Features

  • Automated highspeed milling with disk stack capability

  • 7-axis processing with 5-axis milling + 1 axis for the mill disk stack + 1 axis for rotating the stack

  • Jaeger Hybrid Spindle with high milling speed of 60,000 rpm

  • 24/7 milling capability

  • Mills single units in less than 8 minutes

  • Millable materials include:
  • ZENOTEC ZrBridge (translucent) for fabricating esthetic full-contour crown and bridge frameworks

  • ZENOTEC ZrCrown+ zirconia ceramic uncolored pre-stained in shade B2

  • ZENOTEC ZrBridge high-performance zirconium dioxide for the fabrication of full ceramic crowns and bridges

  • ZENOTEC ProFix for temporary restorations

  • ZENOTEC Model Discs for milling models